Parkside PASS 3.6 B2 Manuel d'utilisateur télécharger pdf (Page 21)

PASS 3.6 B2

CORDLESS SCREWDRIVER

PASS 3.6 B2

Introduction

Congratulations on the purchase of your

new appliance. You have selected a high-

quality product. The operating instructions

are part of this product. They contain important

information on safety, use and disposal. Before

using the product, familiarise yourself with all

operating and safety instructions. Use this product

only as described and only for the speciﬁ ed areas

of application. Please also pass these operating

instructions on to any future owner(s).

Proper use

This appliance is designed for screwing into wood,

plastic and metal. Use the appliance only as described

and only for the areas of application speciﬁ ed.

Any other uses or modiﬁ cations to the appliance

are deemed to be improper usage and may result

in serious physical injury. Not for commercial use.

Features

ON/OFF switch

Rotation direction switch/safety lock-out

LED

Tool holder

Locking collar

Torque setting

Battery level display

Locking button

Charging socket (appliance)

Charger

Package contents

1 cordless screwdriver PASS 3.6 B2

1 charger PASS 3.6 B2-1

1 carrying case

24 bits x 25 mm

2 bits x 50 mm

1 bit extension

1 operating instructions

Technical details

Cordless screwdriver: PASS 3.6 B2

Rated voltage: 3.6 V

Battery (integrated): LITHIUM-ion

Battery capacity: 1500 mAh

Nominal idle speed: n

= 200 min

-1

Torque: max. 4.0 Nm

Tool holder: 6.35 mm (¼")

Charger: PASS 3.6 B2-1

INPUT:

Rated voltage: 230 - 240 V∼ 50/60 Hz

Rated current: 200 mA

OUTPUT:

Rated voltage: 5.5 V

Rated current: 600 mA

Charging time: approx. 3 hours

Protection class: II /

Noise and vibration data:

Noise measurement determined in accordance

with EN 60745 The A-rated noise level of the

power tool is typically:

Sound pressure level: 57 dB(A)

Sound power level: 68 dB(A)

Uncertainty K: 3 dB

Vibration values (vector total of three directions)

determined in accordance with EN 60745

Screws: Vibration emission value ah = 0.393 m/s

Uncertainty K = 1.5 m/s

The vibration level speciﬁ ed in these instructions has

been measured in accordance with the standardised

measuring procedure speciﬁ ed in EN 60745 and

can be used to make equipment comparisons.

The speciﬁ ed vibration emission value can also

be used to make an initial exposure estimate. The

vibration level varies in accordance with the use of

the power tool and may be higher than the value

speciﬁ ed in these instructions in some cases. It is

easy to underestimate the vibration load if the

electrical power tool is used regularly in a certain

manner.

IB_96266_PASS3.6B2_LB1.indb 18IB_96266_PASS3.6B2_LB1.indb 18 23.12.13 17:0423.12.13 17:04

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

Parkside PASS 3.6 B2 Manuel d'utilisateur Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Parkside PASS 3.6 B2