Parkside PWS 125 A1 Manuel d'utilisateur télécharger pdf (Page 59)

56

PWS 125 A1

GB

MT

RISK OF INJURY!

► Always use the angle grinder with the blade

guard

. The blade guard should be installed

securely. Set it so that the highest possible

degree of safety is achieved, i.e. the smallest

possible part of the grinding disc is exposed

to the operator (see Figs. C, D). The blade

guard

is designed to protect the operator

from fragments and accidental contact with

the grinding tool. The blade guard has 5 stop

positions.

► Turn the blade guard

to the required position

(working position).

The closed side of the blade guard

must

always be toward the operator.

Using the additional handle

CAUTION!

► For safety reasons this appliance may only

be used with the additional handle

.

The additional handle

can be screwed on

the left or the right depending on the work

method.

Switching on and oﬀ

Check the accessory tool before use. It must be

properly installed, may not be damaged or damp,

should have no cracks and turn freely. Carry out

a 60 second test run. Do not use non-circular or

vibrating tools. Be aware of unusual noises and

sparks. Check whether all the fastening elements

are correctly installed.

Switching on:

♦ Press the safety lock-out .

♦ Press the ON/OFF switch

.

Switching oﬀ :

♦ Let go of the ON/OFF switch

.

Setting the rotational speed

♦ Select the desired speed as needed. Turn the

rotational speed preselector adjusting wheel

to the required setting. The required rotational

speed depends on the material being processed

and can be determined through practical tests.

The following table lists suggested settings for

the most common applications. Not all of the

accessories described are included in the

delivery.

Rotation speed preselection:

Material Use Tool Ad-

justing

wheel

Plastic,

lacquer

Polishing Lamb's

wool hood

1

Finishing Felt polish-

ing disc

1

Metal Finishing Buﬃ ng

wheel

1

Paint

removal

Sanding

disc

2–3

Wood,

Metal

Brushes,

Rust removal

Cup brush,

Sanding

disc

3

Metal Grinding Grinding

disc

4–6

Metal Roughing Roughing

disc

6

Metal Cutting Cutting

disc

6

Changing grinding tools

Always wear protective gloves when

changing cutting/rough grinding discs.

♦ Press the spindle locking button

only when

the mounting spindle

is at a complete stand-

still (see Fig. A).

♦ Press the spindle locking button

to lock the

mechanism.

♦ Undo the tensioning nut

using the spanner

(see Fig B).

IB_102828_PWS125A1_LB5.indb 56 22.08.14 11:40

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 78 79

Commentaires sur ces manuels

Pas de commentaire