Parkside PWS 125 A1 Manuel d'utilisateur télécharger pdf (Page 52)

49

PWS 125 A1

GB

MT

WARNING!

► The vibration level varies in accordance with

the use of the tool and may be higher than

the value speciﬁ ed in these instructions in

some cases. It is easy to underestimate the

vibration load if the electrical power tool is

used regularly in this manner. For an accurate

estimate of the vibration load during a certain

working period, the times during which the

appliance is switched oﬀ or is running but not

actually being used must also be taken into

consideration. This can signiﬁ cantly reduce

the vibration load over the total working

period.

Explanation of the symbols on the appliance!

Read the original operating

instructions and safety instruc-

tions before initial operation.

Wear ear protection!

Wear protective glasses!

Wear sturdy work boots!

Wear protective gloves!

Wear a dust mask!

Not approved for wet grinding

Not approved for side grinding

Using damaged cutting or

grinding discs is dangerous

and may cause serious injury!

General Power Tool

Safety Warnings

WARNING!

► Read all safety warnings and all instructions.

Failure to follow the warnings and instructions

may result in electric shock, ﬁ re and/or serious

injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of ﬂ am-

mable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiﬁ ed plugs and matching outlets

will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

IB_102828_PWS125A1_LB5.indb 49 22.08.14 11:40

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 78 79

Commentaires sur ces manuels

Pas de commentaire