Parkside PSTDA 18-Li A1 Manuel d'utilisateur télécharger pdf (Page 12)

8

PSTDA 18-Li A1

GB

Setting the stroke rate

The ON/OFF-switch has a variable speed control.

Pressing the ON/OFF switch lightly yields

a low speed. Increasing pressure increases the speed.

NOTE

►

The integrated motor brake ensures rapid

stoppage.

Adjusting the pendulum stroke

♦ You can use the pendulum stroke switch

to adjust the pendulum movement of the saw

blade . You can achieve ﬁ ne, clean-cut edges

without pendulum movement (setting “0”).

Deactivate pendulum movement when working

on thin workpieces. You can achieve an increas-

ingly fast work rate if the pendulum stroke is

activated (settings 1–3).

Switching the appliance on/oﬀ

Switching the appliance on:

♦ Push the safety lock-out to the left or right

and keep it pressed.

♦ Press the ON/OFF switch .

Once the saw is running, you can release

the safety lock-out

. The working light

illuminates when the ON/OFF switch

is

depressed lightly or completely. This allows

illumination of the work area in low lighting.

Switching the appliance oﬀ :

Release the ON/OFF switch .

Maintenance and cleaning

WARNING! RISK OF INJURY! Switch

the power tool oﬀ and remove the

battery before starting any work on the

power tool.

■ The appliance must always be kept clean, dry

and free from oil or grease.

■ Use a soft, dry cloth to clean the housing.

■ If a lithium-ion battery is to be stored for an

extended period, the charge level should be

checked regularly. The optimum charge level

is between 50% and 80%. Optimum storage

conditions are cool and dry.

■ Clean the appliance after completing your

sawing work.

■ Remove any dirt (e.g. sawdust). Clean the saw

blade mounting, if necessary with a brush or

by blowing it out with compressed air.

Warranty

You are provided a 3-year warranty on this

appliance, valid from the date of purchase.

This appliance has been manufactured with

care and inspected meticulously prior to

delivery. Please retain your receipt as proof

of purchase. In the event of a warranty claim,

please contact your Customer Service unit by

telephone. This is the only way to guarantee

free return of your merchandise.

The warranty only covers claims for material and

manufacturing defects, not for damage sustained

during carriage, components subject to wear

and tear or damage to fragile components such

as switches or batteries. This appliance is intended

solely for private use and not for commercial

deployment.

The warranty shall be deemed void in the case

of misuse or improper handling, use of force or

interventions which were not carried out by one

of our authorised Service centres. Your statutory

rights are not restricted by this warranty.

The warranty period is not extended in conse-

quence of repairs carried out under the warranty.

This also applies to replaced and repaired compo-

nents. Any damage or defects present at the time

of purchase must be reported immediately after

unpacking, but no later than two days after the

date of purchase. Repairs carried out after expiry

of the warranty period shall be subject to charge.

IB_102866_PSTDA18-LiA1_LB4.indb 8 22.10.14 13:58

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 88 89

Commentaires sur ces manuels

Pas de commentaire